40N Medical Device Testing Equipment For Syringe Needle Cone Joint

Multifunctional tester for cone joint of syringe needle

Product introduction:
It adopts 5.7 inch (120 × 90) single color LCD touch screen and Chinese menu display. The nominal capacity of the syringe is selected by the keyboard, and the axial force, torque, holding time, internal water pressure, separation force and leakage rate values are displayed during the test. The test results can be printed out by the airborne printer.
It fully meets the relevant standards of 1962.1 and 1962.2.
It fully conforms to iso80369 ~ 3, iso80369 ~ 6, iso80369 ~ 7 and iso80369 ~ 20
At the same time, it can also measure the liquid leakage, air leakage, leakage rate, overload, separation force, stress and assembly and other indicators.
Axial force: 20n ~ 40n, the error is not more than ± 2%;
Internal water pressure: 200KPa ~ 400kPa, the error is not more than ± 5kpa;
Separation force: 1n ~ 40n, the error is not more than ± 2%;
Holding time: 1 ~ 60s, the error is not more than ± 1s, arbitrarily set;
Torque: 0.1N · M
Nominal capacity: 1ml ~ 60ml, optional.
Net weight: 20kg
Overall dimension: 440 × 350 × 384 (mm)
The instrument will be upgraded free of charge according to the national standard
Test leakage rate with negative pressure equipment
Fy15810-c injector tightness negative pressure tester
It adopts 5.7 inch (120 × 90) single color LCD touch screen and Chinese menu display. The test results can be printed out by the on-board printer, which fully meets the requirements of iso80369, iso9626-2016 and iso7864-2016
Negative pressure detection: 88kpa error is not more than ± 0.5kpa, LED digital display;
Negative pressure output: 88kpa ± 0.5kpa;
Test time: 1s ~ 10min, arbitrary setting, LED digital display.
(the negative pressure of the measuring system shall not drift within 5 minutes ± 0.5kpa)
Net weight: 8.5Kg overall dimension: 400 × 290 × 240 (mm)